Standard Foam Berm Kit
A closed-cell foam wall coated in seamless spray polyurea and welded to an integral floor liner. It rolls out flat, sets up in minutes, and takes a loaded service truck driving straight over the wall without tearing – which is the single thing PVC-walled berms cannot do.
- Seamless polyurea skin, no welded joints to fail
- Rated from -40°F to 180°F service
- Repairable in the field with a patch kit
- Folds to a single pallet for transport
- Footprint
- 12' x 16'
- Wall height
- 12 in
- Capacity
- 1,440 gal
- Deploy time
- Under 20 min
- Drive-over
- Yes, loaded truck
Polyurea Coating System
A two-component spray system for lining containment basins, tank pads, transformer vaults and berm walls. Applied hot and at pressure, it builds a monolithic membrane over concrete, steel, foam or geotextile with no seams anywhere in the containment envelope.
- Immersion-grade hydrocarbon resistance
- Bridges substrate cracking and thermal movement
- Return to service the same day
- Application by certified member applicators only
- Coverage
- Approx. 1,600 sq ft at 60 mil
- Cure
- Tack-free in seconds
- Tensile
- 2,000-4,500 psi
- Elongation
- 300-600%
- Service temp
- -60°F to 350°F
Emergency Spill Response Kit
Everything a first responder needs in the first ten minutes, in one wheeled overpack drum: hydrocarbon-selective pads, containment booms, socks, disposal bags, gloves, goggles and a written response card. Sized for the 55-gallon incident that makes up the bulk of reportable releases.
- Oil-only sorbents – they float and shed water
- Drum doubles as the disposal container
- Inventory checklist inside the lid
- Restock list keyed to your SPCC plan
- Absorbency
- Approx. 55 gal
- Contents
- Pads, booms, socks
- Container
- 95 gal overpack drum
- Standard
- OSHA 1910.120 aligned
- Restock
- Individual items available
